Las Vegas tradesman

Meet Mike.Twenty‑five years of figuring out what’s actually wrong.

Cast-iron sliding door hardware and track on a pale timber door.
Sliding‑door hardware · illustrative photography

I work across construction, carpentry, electrical and home repair — the kind of background that comes from seeing how a house fits together, not just fixing what’s in front of you. I bring that to the everyday problems homeowners call about, across Las Vegas, Henderson, Summerlin, Spring Valley, Paradise, and Enterprise.

Background at a glance

25+ years in the trades

Owner-operated— one person, call to cleanup

Licensed & insured

Mon–Sat, 8am–6pm

How the experience came together

Not one job.
Not one trade.

A carpenter marking a measurement on a board with a pencil and tape measure.

It came from years of working on real homes — construction sites, finish carpentry, electrical work, and the kind of repair calls that show up after something has already gone wrong. Each one taught a different piece of how a house actually works.

Construction teaches how a home is put together: what’s structural, what’s cosmetic, and how one system depends on another. Carpentry teaches precision — fit, finish, and the patience to redo something until it’s actually right.

Electrical work teaches safety and diagnosis, and just as much, respect for where the job should stop and a licensed electrician should take over.

Repair work teaches something different again: the thing a homeowner notices is rarely the whole story. Finding the actual cause, instead of patching what’s visible, is most of the job.

Every trade teaches you something the others don’t. Put them together and most of what shows up in a home starts making sense — and so does knowing when it’s time to bring in someone else.

Mike · owner, Mikes PRO Handyman

Experience across the home

Five areas, worked for years — not five services on a menu.

What each one actually means for the job when you call.

A drill driving a screw into a door hinge.
Carpentry & finish
Hands mounting a round ceiling light fixture.
Non-permit electrical
Hands working on a P-trap under a kitchen sink.
Everyday repairs
Brass plumbing fittings and a pipe wrench laid out on a bench.
Tools & materials

Swipe · illustrative photography

Building &
construction

Years on construction sites teach how a house actually goes together — framing, sequencing, and why one trade's work depends on the one before it. That's the frame everything else hangs on.

Carpentry &
finish work

Carpentry is where precision shows. A door that closes quiet, trim that sits flush, a shelf that's actually level — finish work is what a homeowner notices every day, long after the job is done.

A drill driving a screw into a door hinge.

Electrical
troubleshooting

Enough experience to diagnose a problem correctly, handle it safely within non-permit scope, and know exactly where that scope ends — light fixtures, switches, GFCIs and similar minor work.

Doors, fixtures,
drywall & repairs

The everyday work: sticking doors, loose fixtures, drywall dents, worn trim, hardware that never got finished right. Small jobs done properly instead of rushed.

Hands working on a P-trap in the cabinet under a kitchen sink.

Maintenance
& diagnosis

Knowing what a home should look like when it's healthy makes it easier to catch what's actually wrong — and to tell you honestly whether it's a quick fix or something bigger.

A door latch and strike plate photographed close up.How I approach a problem
How I approach a problem

The symptom is where you start. It isn’t the diagnosis.

What you tell me
“The door won’t latch properly any more.”
  • Could be

    The hinges — loosened, worn, or set slightly proud of the mortise.

  • Could be

    Strike-plate alignment, where the latch and the plate no longer meet square.

  • Could be

    The frame itself, pulled out of true.

  • Could be

    The house settling, which moves everything hung on it.

The fix depends on which one it actually is. Replacing a latch on a frame that has moved buys a few months at best.

A damaged wall isn’t always a drywall problem — sometimes it’s a slow leak or movement behind the surface that has to be found first.

A fixture that won’t sit right can come down to the mounting, the wiring, nearby plumbing, or the surrounding finish work, not the fixture itself.

These are patterns, not diagnoses — the cause always depends on taking a real look at your home.

Read the full diagnostic walk-through

Craftsmanship

The details make the difference.

Most of what separates a repair that lasts from one that looks finished on day one happens in the parts nobody photographs — the fit, the alignment, the half-millimetre.

A door that closes quiet. Trim that sits flush. A shelf that’s actually level.

Hands setting a doorknob spindle through a door.
Brass plumbing fittings and a pipe wrench laid out in order on a bench.
Gloved hands easing a laminate plank into place against the last run.

Finish work is what a homeowner notices every day, long after the job is done.

Precision

Careful troubleshooting instead of guessing at the fix.

Respect

Protecting floors and treating the space like it matters — because it's your home, not a job site.

Finish

Cleanup when the job's done, not just when it's convenient.

Durability

Repairs meant to hold up, not just look finished on day one.

A stucco home exterior in hard desert sunlight.
Illustrative photography — not a customer project
Built for Las Vegas homes

A repair playbook from a mild climate doesn’t hold up here.

Las Vegas homes deal with a specific set of conditions, and knowing them changes how a job gets done.

  • HeatExtreme summer heat that stresses seals, caulking and finishes year-round.
  • WaterHard water that wears on valves, water heaters and fixtures throughout a home — not only where the symptom shows.
  • DustDust that works into weatherstripping, tracks and hardware over time.
  • MovementDoor and trim movement as framing and slabs shift with heat and settling.
  • MonsoonStorms that find gaps in flashing and sealing that stayed hidden all year.
  • Boom-eraConstruction now old enough for the original shortcuts to start showing.

I’ve written about a lot of this in more detail:

An open invitation

Tell me what’s going on at your place.

The first step is just understanding the project — what’s happening, and whether it’s a fit for this kind of service. You don’t need the right words for it. Call and describe it, or book online and we’ll go from there.

Mon–Sat, 8am–6pm · Licensed & insured · Electrical work is limited to minor, non-permit service — full scope here. Permit-level electrical, structural work, major plumbing, HVAC, roofing, gas lines and remediation go to the appropriate licensed contractor.

Photography note: the photographs on this page are licensed stock images used to illustrate a type of work. None depicts Mike or a completed customer project, and nothing is captioned as such. The portrait frame above stays empty until a real photograph exists.